Coastal Home Blog

Nautical DIY

With a little ocean hued paint and a roll of sisal rope, transform a thrift store wooden dresser into a beautiful one of a kind nautical dresser.

Nautical Dresser DIY


fine-grit sandpaper or sanding block
damp cloth
high-volume, low-pressure (HVLP) paint sprayer
wood filler
spackle knife
drill and 3/4” drill bit
painter’s tape
utility knife


wooden dresser
(1) quart of white semi-gloss latex paint-and-primer-in-one
(1) quart of navy blue semi-gloss latex paint-and-primer-in-one
(1) quart of enamel primer
spool of sisal rope

Choosing The Right Dresser

It’s important to choose a wood dresser that will easily take paint and can be drilled for hardware. Solid wood dressers with flat drawer fronts work best.

Clean and Prep

Remove any glued on embellishments to give an old dresser an updated look. This is easy to do by using a chisel or a flat screwdriver to pop the embellishment from the drawer front.

Drill new holes to attach the new hardware to the drawer fronts . Fill any old holes with wood filler, then smooth the surface using a spackle knife.

Fill Existing Holes and Sand

Rough up and remove the existing finish to prepare the dresser for new paint. Use fine grit sand paper to remove the existing sealer. Once the entire surface has been sanded, be sure to wipe the dresser clean using a damp cloth. 

Paint Casing and Drawer Fronts

The key to a nautical design is painting it with two tones of paint, in this case ultra-white and navy blue. First, coat the entire casing with ultra-white latex paint using the paint sprayer. The ultra-white will serve as a clean, crisp backdrop against the dark navy blue drawer fronts.

Add visual depth and sharp contrast by painting the drawer fronts with navy blue latex paint using the paint sprayer.

Drill Holes for Drawer Pulls

Add nautical texture with chunky sisal rope as drawer pulls. Before the sisal can be cut and attached, locate the center point of the drawer front, then determine the exact placement of each end of the pull. Use drill and 3/4” drill bit to add holes.

Cut and Attach Sisal Rope Pulls

Cut 14” strips for use as pulls using a utility knife. Wrap painter’s tape around the ends of the rope, then thread the pulls through the drilled holes and add knots along the inside of the drawer front.

Nautical Painted Dresser

Nautical navy and white with rope accents dresser DIY. A cool nautical DIY weekend project. 

PHOTO CREDITRustic White Photography, LLC

DIY LINK: Nautical Dresser by DIY Network

Nautical Rope Fringed Shower Curtain DIY


macramé trim
3/8″ twisted cotton rope
shower curtain
sewing machine

1. Start by pinning the macramé trim to the bottom hem of  your shower curtain.

Sew To Hem

2, Run a zig zag stitch along the hem with your sewing machine.

3. Determine how much more length is needed for the curtain to hit the floor of the bathroom.

4. Double that amount and add 2 inches.

Cut Cords

5. Cut segments of rope to that length. If you’re using thick, twisted rope like I did , you can untwist it into three smaller cords.

Fold Cords In Half

6. Fold one of the cords in half.

Push Loop Through

7. Push the loop through one of the

Pull cords tight

8. Pull the cords tight. Continue the process along entire width of the trim.

9. Once you’re finished, hang the curtain on shower hooks.

Trim rope fringe

10. Give the fringe a bit of a haircut!

 This nautical DIY will give your coastal bathroom a special nautical touch in 10 easy steps. Try this neat nautical DIY with rope to create a beautiful rope fringe shower curtain.


Nautical Rope Fringed Shower Curtain By Honestly WTF

Coastal DIY Beach Specimen Display Shadow Box

Coastal DIY Beach Specimen Display Shadow Box


Beach specimen such as shells, driftwood, and seaweed. If you won’t make it to the beach this summer, you can purchase most of these things at a craft store!
Shadow box frame (I got mine at a craft store)
Card stock
Embroidery thread and needle

Glue gun and hot glue


First, cut your card stock so that it fits snugly in your shadow box frame. If you’re using embroidery thread like I did, flip the card stock over and add little dots or lines as a guide for where you’d like to place the thread.

Use a needle and thread to embroider your card stock. I made tiny x-shapes and uneven lines. I wanted to keep this feeling irregular and raw.

Next, arrange your specimen on your card stock however you’d like. Play around with different placements until you find one that feels just right!

Finally, glue your arrangement in place using hot glue, and insert the card stock into the shadow box. You’re all set!


Nautical DIY for all those cool coastal beach treasures found along the seashore. Seaside coastal decor  and nautical DIY you will love.


Photo Credit & DIY Link:

Coastal Specimen Shadow Box DIY by Free People

Subscribe and Save!

Sign up to receive unique tips, ideas for coastal living and special discounts...

so That You Can Get Discount Coupons, Promos, Company News and More!

You will be unable to submit the form unless you turn your javascript on.

Newsletter Sign-Up